Support
Help getting connected, and answers to common questions.
Can’t find your answer? Email appsupport@parkchester.co and include your device model, iOS version, and console model.
Getting started
- Connect your iPhone or iPad to the same network as your console.
- Open the app and allow Local Network access when asked.
- Tap your console in the list, or enter its IP address and choose X32 / M32 or WING.
- Choose your mix, then move your faders.
Setting up a WING
On the WING, open Setup → Remote, turn Remote/OSC on, and make sure Remote Lock (OSC) is off. WING Rack and WING Compact work the same way. If your WING doesn’t appear in the list, enter its IP address and choose WING.
Common questions
My console doesn’t show up in the list
Make sure the device and console are on the same network. Guest Wi-Fi and routers with “client isolation” or “AP isolation” turned on block this, so use the main network. You can also tap “Scan again” or enter the console’s IP address by hand. The scan covers the network the device is on, for example 192.168.1.x. On a WING, also check that Remote/OSC is on and the OSC lock is off.
I connected, but no mixes appear
The app only shows buses whose console name starts with a lowercase “m”, like mDrums. Rename the bus on the console and it will appear, with the “m” removed.
A channel is missing from my mix
The app only shows channels that are switched on for your mix. If a channel’s send to your bus is off on the console, it is hidden. Ask your engineer to turn the send on and it will appear.
The app says it can’t reach the console
Check that Local Network access is on: Settings → Privacy & Security → Local Network → Parkchester Monitor Mix. Without it, iOS blocks the connection.
The faders feel slow or drop out
Wi-Fi quality matters on a busy stage. Use a dedicated router for the console and devices, prefer 5 GHz, keep the router in line of sight of the stage, and avoid sharing it with audience Wi-Fi.
What does double-tapping a fader do?
It sets that fader to 0 dB (unity). Be careful on in-ear mixes, since it can be louder than where the fader was.
Can I change pan, EQ, or compression?
Yes, with some limits. When your mix is a stereo pair, tap Pan to place each channel left or right. On X32 and M32, tap EQ or COMP beside the master fader to adjust your mix’s EQ and compressor. EQ and compressor aren’t available on WING yet. The app doesn’t mute channels or control effects.
How do I put my channels in my own order?
In Mine, channels appear in the order you added them. Tap Reorder at the top to drag them into any order you like.
Can I try the app without a console?
Yes. Tap “Try demo mode” on the first screen to explore with sample data.
Does it need an internet connection?
No. The app only talks to your console over the local network.